EPOXY THINNER is a solvent used to thin epoxy resin. It helps to reduce the viscosity of epoxy, making it easier to apply, especially in cases where a thinner cg is desired or when the ambient temperature is low, which can thicken epoxy. Thinning epoxy can also extend its working time, allowing for easier application and reducing the likelihood of bubbles forming in the resin. When using epoxy thinner, it's essential to follow manufacturer instructions carefully, as different types of epoxy and thinners may have specific ratios or guidelines for mixing. Here are some general considerations: Ratio: Typically, epoxy thinners are added in small amounts relative to the volume of epoxy resin. Start with a small amount and mix thoroughly. Add more if needed, but avoid over-thinning as it can affect the final properties of the cured epoxy. Application: Thinning epoxy makes it easier to apply with a brush, roller, or spray gun. This is useful for projects like fiberglassing, laminating, or coating surfaces where a smoother finish is desired. Temperature: Thinning epoxy can help maintain workability in cooler temperatures. Cold temperatures can increase the viscosity of epoxy, making it harder to work with. Mixing: Always mix epoxy and thinner thoroughly but gently to avoid introducing air bubbles. Stir slowly and avoid vigorous mixing. Safety: Use epoxy thinner in a well-ventilated area or wear a respirator if recommended by the manufacturer. Some thinners can be volatile and may have strong odors. Compatibility: Ensure that the epoxy thinner you choose is compatible with the type of epoxy resin you are using. Different types of epoxy may require specific types of thinners.